SHOP
AeroCoach Angles aerobar extensions
ANGLES
£89.50
In stock
1
Product Details
MBN:
ANGLES
PLEASE NOTE: current production lead time 7-8 weeks
STABILITY/COMFORT/BIOMECHANICS
The AeroCoach Angles extensions for aerobars are ergonomically designed, made of strong and stiff 7020 series aluminium and use an industry standard 22.2mm diameter.
The 3D printed end gripper has finger grooves to allow you to stay locked into the aero position. The gripper has a shaped end with an internal channel for cable entry and is compatible with all mechanical shifters and electronic shifters (such as Di2 or SRAM eTap). No drilling for cables is required. Track grippers with no holes for shifters are also available
UCI LEGALITY GUARANTEED WITH 25deg ANGLES
Never fail the UCI 1.3.023 10cm vertical regulation ever again! Relevant only for races held under UCI regulations (not triathlons or races run under UK CTT regulations), the 25 degree Angles are specifically designed to ensure that you cannot fail the 10cm height rule when using electronic gearing. Please note that the 75cm/80cm extension reach rule must still be adhered to. In some situations the 35deg Angles can also stay within UCI vertical limits - please see the geometry chart below for full information. Angles extensions have been specifically approved by the UCI when the 1.3.023 regulations are respected and are legal for the Tokyo Olympics.NEW 35 DEGREE TRACK DESIGN
To help stay within the UCI 1.3.023 guidelines, 35deg track extensions now come with a flattened top (please see picture in the gallery). This makes it easier to hit the 10cm vertical limit, and we recommend combining the 35deg track extensions with 15deg angled washers, and our micro adjust spacer kit to fine tune your position.AERO COMPUTER MOUNT
PLEASE NOTE - STANDARD ROUND CLAMPING SECTION COMPUTER MOUNTS ARE NOT COMPATIBLE WITH THE ELLIPTICAL SECTION OF THE ANGLES. Garmin or Wahoo mounts are available using the drop down list above. Each computer mount comes with an optional 7 degree adapter to keep your Garmin centralised in your plane of view, even if you have adjusted your Angle tips to be closer together. A standard round tube adapter is also included for round extensions.CHOOSE YOUR ANGLE
Please refer to the geometry information below to choose the appropriate set of Angles for you. Each pair of standard Angles comes in either 25 degree, 35 degree or 45 degree bend, and all have the same overall horizontal length of 360mm. The end grippers bend at a 25deg angle to the central elliptical section. If using angled spacers we recommend to use 10deg spacers with 25deg extensions, 15deg spacers with 35deg extensions and 20deg spacers with 45deg extensions. STANDARD GEOMETRY
25 degree 35 degree 45 degree
A (Horizontal round section) 140mm 140mm 140mm
B (Angle of bend) 25 35 45
C (Elliptical section) 145mm 165mm 185mm
D (Gripper length) 95mm 95mm 95mm
E (Vertical height from CENTRE
of round section to top of gripper) 95mm 145mm 190mm
F (Total length) 360mm 360mm 360mm
SPECIFICATIONS
Material (pole): 7020 aluminiumMaterial (gripper): 3D printed plastic
Aerobar compatibility: All standard extension clamps with 22.2mm diameter
Shifter compatibility: All makes of electronic and mechanical shifters
Weight (pair): 190g (25 degree)
Save this product for later