AeroCoach micro adjust spacer kit £ 27.50 incl. tax* Add to basket View basket FINE TUNE YOUR COMFORTNeed to adjust your aerobar stack in smaller increments? The AeroCoach micro adjust spacer kit allows you to increase or decrease stack height over a smaller range than typical 5mm or 10mm changes, letting you fine tune your preferred stack height for comfort and aerodynamics. The spacers are universally compatible with slotted channels to accommodate different bolt mounting widths.FROM 2MM TO 12MM STACK ADJUSTMENT - 9 COMBINATIONSIncluded in each pack are 2x 5mm spacers, 2x 3mm spacers and 4x 2mm spacers. Each spacer is 50mm long and 16.5mm wide. Made from SLS printed nylon, this gives the following stack ranges each side:2mm (1x 2mm spacer)3mm (1x 3mm spacer)4mm (2x 2mm spacers)5mm (1x 5mm spacer)7mm (1x 5mm spacer + 1x 2mm spacer)8mm (1x 5mm spacer + 1x 3mm spacer)9mm (1x 5mm spacer + 2x 2mm spacers)10mm (1x 5mm spacer + 1x 3mm spacer + 1x 2mm spacer)12mm (1x 5mm spacer + 1x 3mm spacer + 2x 2mm spacers)INSTALLATIONSimply remove your current aerobar stack and add AeroCoach spacers as required. LONGER/SHORTER BOLTS MAY BE NECESSARY - THESE ARE NOT SUPPLIED WITH THE MICRO ADJUST KITSpacers can be placed at the top or bottom of the aerobar stack - please refer to the aerobar manufacturers instructions for correct torque settings when tightening up the aerobars.SPECIFICATIONSMaterial - SLS nylon (black)Width - 16.5mmLength - 50mmBolt hole width - 6mmHeight - 2mm to 5mm * Based on residence in United Kingdom. Tax rates for other countries will be calculated at the checkout. Price exclusive of tax: £ 22.92.